Installation

Home / Installation
When installing a boiler special attention should be given to the auxiliary equipment required to obtain the nominal performances of the design in optimal operating conditions throughout the life of the boiler.

– In the water circuit it is necessary to start with adequate treatment for removing fouling products, regularizing pH and removing dissolved oxygen.

-For yields of more than 8t/h, the possibility of energy savings offered by the installation of an economizer should be explored.

-Depending on the fuel, the combustion equipment must be appropriate and of a well-known brand, paying special attention to the preparation of fuel (particularly in the case of fuel oil) so that the conditions of arrival thereof at the combustion outlet are as specified.

SOGECAL S.L. installs equipment of a universally recognized brand in its boilers, studying its adaptation technically and incorporating the necessary components for full automatic operation, with intrinsic control and safety equipment and PLCs that allow both the control of the installed unit and the reading of variables controlled by external computer.

SOGECAL SL, through its Technical Office, advises customers on the appropriate equipment to install in each case from the point of view of improved performance and automaticity and/or the reduction of pollutants from combustion gases released into the atmosphere.

Uso de cookies

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.

ACEPTAR
Aviso de cookies